Close up of the TS 410 STIHL Cutquik® ElastoStart™

Diagram of TS 410 STIHL Cutquik® X2 Air Filtration System

410 STIHL Cutquik® atop cement blocks next to STIHL protective gear

Man cutting brick with the STIHL TS 410 Cutquik®

Wide shot of man cutting bricks with the STIHL TS 410 Cutquik®

TS 410 STIHL Cutquik®

Name: TS 410 STIHL Cutquik®
Brand: STIHL
SKU: ts410
Rating: 3.8000 (5 reviews)

Ask a Question

X2 air filtration and anti-vibration system make this cut-off machine easy to use and maintain.

Features

IntelliCarb™ Compensating Carburetor
X2 Air Filtration System
Semi-Automatic Belt Tensioning
Bayonet-Style Filler Cap

The TS 410 is a lean, clean, cut-off machine that’s easy to use and easier to maintain. Just squeeze the trigger and watch its 12” cutting wheel grind through iron, steel, concrete, and expectations. Part of our STIHL Cutquik® series, this model features advanced filter technology that automatically handles daily maintenance. Its revolutionary X2 air filtration removes 99.96% of particles from air entering the carburetor and engine, making its onboard filters virtually maintenance free. Good thing we included an anti-vibration system to maximize comfort—a feature you’ll appreciate after a full day of cutting.

NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.

Features
- IntelliCarb™ Compensating Carburetor -
  The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
- X2 Air Filtration System -
  The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
- Semi-Automatic Belt Tensioning -
  With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
- Bayonet-Style Filler Cap -
  Includes retainer for easy use, even with gloves on.
- Anti-Vibration System -
  STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- STIHL ElastoStart™ -
  The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
- Ergonomic Grip -
  The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
- Water Connection -
  Water connection with shut-off valve and quick connector.

Specifications

Questions And Answers

Reviews

Warnings And Safety
The STIHL X2 Air Filtration System - Video
Cut-Off Machine Safety, Maintenance and Operation - Video
Product Instruction Manual (PDF)
Product Safety Manual (PDF)
STIHL Limited Warranty
Contact Us

WARNING! Never use carbide-tipped, wood cutting, or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact, or thrown tips. Never cut wood of any type.
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.
WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.

SERVICE AND TIPS

Operating Instructions

The operating instructions for your STIHL product are available right here 24/7. Please review your instructions carefully and often.

Get Operating Instructions

FAQ

Have a question? We have the answer you need. Browse our most frequently-asked questions and get information right here.

Get Answers In The FAQ

Guides And Projects

Discover projects with step-by-step instructions, find advice and tips related to your product and check out helpful how-tos.

View Guides And Projects

POWER SOURCE	Gas
WEIGHT	20.7 lbs.
MAXIMUM CUTTING DEPTH	3.9 in.
MAXIMUM WHEEL SIZE	12 in.
MAXIMUM SPINDLE SPEED	5,350 rpm
ARBOR SIZE	.79
ENGINE SPEED	9,000 rpm
ENGINE POWER	4.4 bhp
FUEL CAPACITY	24 oz.
DISPLACEMENT	66.7 cc