Clear out your garage and make space on your trailer, we’re about to drop an all-new lineup of innovative, top-performing, must-have outdoor power equipment. These tools are Made for America. Made for You. Put your local STIHL Dealer on speed dial to get your hands on these cutting-edge products along with exceptional service and support. See what’s coming:
Releasing Winter 2026, $479.99 MSRP*
Featuring a lightweight design and low noise output, it delivers constant power through sequential battery discharge—offering more power than a 63cc blower and over 40% quieter than traditional gas blowers.
Weight w/ 2x AP 300 S
23 lbs.
Run time w/ 2x AP 300 S
Up to 194 minutes
Sound Pressure Rating
64 dB(A)
Blowing performance w/ AP 300 S
21 Newtons, 176 mph, 527 cfm
Releasing Winter 2026, $649.99 MSRP*
Delivers 25% more blowing force than the BRA 200, with low noise and constant power. Featuring integrated connectivity, full HMI display, all while weighing just 24 lbs. with two AP 300 S batteries.
Weight w/ 2x AP 300 S
24 lbs.
Run time w/ 2x AP 300 S
Up to 50 minutes
Sound Pressure Rating
66 dB(A)
Blowing performance w/ AP 300 S
26 Newtons, 192 mph, 571 cfm
Releasing Fall 2025, $299.99 MSRP*
Charge up to 24 batteries overnight with the STIHL CM 6 ProPower Hub Mobile—featuring plug-and-play functionality, priority charging, trailer-ready design, and high output in a compact form.
Input voltage
120 V
Max # of chargers
6
Max # of AP 300 S charged in 7h
20
Max # of AP 300 S charged in 8h
24
FSA 50
Releasing Fall 2025, $249.99 MSRP*
Tackle two jobs in one with 10% more power than the FSA 57 and consistent performance from start to finish with the FSA 50. Switch from trimming to edging in seconds for crisp, clean lines, and adjust the shaft and mowing head for comfort and hard-to-reach spots.
Weight w/o battery
6.4 lbs.
Weight w/ AK 10
8.2 lbs.
Run Time w/ AK 10
Up to 25 minutes
Electrical Power Input
0.43 kW
Cutting Width
12 in.
Releasing Winter 2026, $329.99 MSRP*
The GTA 30 packs STIHL precision into a compact 4.4-pound tool—delivering up to 180 cuts per charge, automatic chain tensioning, and a six-inch guide bar for powerful, controlled pruning.
Weight w/ 2x AS 2
4.4 lbs.
Run time w/ 2x AS 2
Up to 50 minutes
Cuts per charge
Up to 180
Mechanical cutting power
4 W
Guide bar length
6 in.
Releasing Winter 2026, $189.99 MSRP*
The HLA 40 offers up to 8.5 feet of reach, a lightweight telescopic shaft, and 115° articulating head—just 8.2 lbs. with the AS 2 battery and up to 40 minutes of run time.
Weight w/o battery
7.7 lbs.
Weight w/ AS 2
8.2 lbs.
Run time w/ AS 2
Up to 40 minutes
Cutter blade length
18 in.
Maximum reach
8.5 ft.
Releasing Fall 2025, $349.99 MSRP*
The STIHL MSA 190 T† is the battery-powered, top-handle chainsaw engineered to match the performance of the STIHL MS 194 T gas unit—without the noise, fumes, or maintenance.
Powerhead Weight w/o batteries
5.7 lbs.
Weight w/ cutting attachment and AP 200 S
9.9 lbs.
Run Time w/ AP 200 S
Up to 48 minutes / 170 cuts
Mechanical Power
1.25 kW
Guide Bar Length
12-14 in.
†For In-Tree Professional Use Only!
Releasing Winter 2026, starting at $399.99 MSRP*
Power, efficiency, and versatility—RMA 353 and RMA 353 V feature wide steel decks, dual battery slots, 4-in-1 mowing, and up to two hours of run time.
Weight w/ AP 300 S
RMA 353: 62.6 lbs.
RMA 353 V: 69.7 lbs.
Deck Width
RMA 353/RMA 353 V: 21.7 in.
Cutting Height
RMA 353/RMA 353 V: 1-4 in.
Grass Catcher Bag Capacity
RMA 353: 19.8 gallons
Self-Propelled Mower Speed
RMA 353 V: 0.6 mph to 2.8 mph
*w/ AP 300 S Battery
Releasing Fall 2025, $309.99 MSRP*
Spray up to 100 gallons On A Single Charge™ with the STIHL SGA 60—built for comfort, control, and consistent performance in a lightweight, battery-powered backpack design.
Weight w/o battery
11 lbs.
Weight w/ AK 10
47.2 lbs.
Max. Pressure
65 psi
# of tanks on Single Charge
Up to 25 tanks
Tank capacity
4 gallons
Releasing Fall 2025, $649.99 MSRP*
Meet the most powerful 9″ battery cut-off machine in the STIHL lineup featuring 60% more power than the previous model. This compact and lightweight machine boasts zero exhaust emissions for work in gas-restricted spaces as well as convenient, onboard water controls to suppress dust for wet cutting.
Powerhead Weight w/o AP 300s
8.6 lbs. (3.9kg)
Weight w/ AP 300 S, no wheel
12.6 lbs. (5.7kg)
Run time w/ AP 300 S in two-inch pavers
Up to 20 minutes
Maximum Spindle Speed
5,350 rpm
Maximum Wheel Size
9 in.
Releasing Winter 2026, $1,399.99 MSRP*
Over 30% more power and 4x quieter, the TSA 500 delivers 5 kW of cutting force with tool-free startup, smart airflow, and a 14″ wheel for deep, clean cuts—no fuel, low maintenance, and IPX4 water resistance.
Weight w/o AP 500 S
20.06 lbs.
Weight w/ 2x AP 500 S
28.88 lbs. / 13.1kg
Run time w/ 2x AP 500 S
Up to 40 minutes
Maximum Wheel Size
14 in.
Releasing Winter 2026, starting at $549.99 MSRP*
Moving 264 gallons in under 90 seconds, the WP 300 is the ideal solution for quick, everyday water transfer. Compact, easy to handle, and built for tough environments, it is ready to tackle routine jobs without slowing you down.
Weight
57.32 lbs.
Maximum output flow
162.73 gpm
Port Size
2 in.
Maximum engine performance [kW / HP]
4.4 / 5.9
Maximum pumping pressure
46.41 psi
Releasing Winter 2026, starting at $599.99 MSRP*
Move over a ton of water every minute with the WP 600. Featuring three-inch ports, a powerful six hp engine, and EPA-compliant jobsite flexibility.
Weight
63.93 lbs.
Maximum output flow
277.38 gpm
Port Size
3 in.
Maximum engine performance [kW / HP]
4.4 / 5.9
Maximum pumping pressure
43.51 psi
Releasing Winter 2026, starting at $899.99 MSRP*
Pump over 24,000 gallons of water in an hour. The WP 900 is in a class of its own, built to handle flooding fields, draining excavations, and clearing large areas fast.
Weight
83.77 lbs.
Maximum output flow
413.95 gpm
Port Size
4 in.
Maximum engine performance [kW / HP]
5.2 / 6.97
Maximum pumping pressure
47.86 psi
Releasing Fall 2025, $209.99 MSRP*
Wet cutting is no longer a two-person job. The fully automatic, battery-powered WSA 40 water tank eliminates the need for manual pumping when operating a gas- or battery-powered STIHL Cutquik® and provides a steady water supply to the cut-off machine.
Weight w/ AS 2
7.8 lbs.
Tank capacity
2.6 gals.
Maximum working pressure
22-36 psi
# of tanks on a Single Charge
Up to 12 tanks
Maximum water flow rate
0.8 gpm
*All prices MSRP. It is STIHL philosophy to continually improve all of its products. As a result, engineering changes and improvements are made from time to time and may alter the information provided herein. Pricing and availability are subject to change without notice.