STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
Technical details
| Displacement | 4.7 cu-in |
| Power | 4.30 kW |
| Engine power | 5.80 HP |
| Engine power | 5.80 bhp |
| Device weight without refuelling | 16.6 lb 1) |
Features
The pictures shown are sample photos. The actual appearance of the equipment features and their specific attachment to the product may differ from the pictorial representations, but will have the same functionality.
Includes retainer for easy use, even with gloves on.
The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
Helps reduce the effort needed to pull the starter rope.
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Long-life heavy duty (HD2), pleated air filter and a secondary filter that are easy to get on and off.
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
Rubber bumper in the front of the engine housing helps protect the unit in the cut.
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Designed for upright fueling. Keeps dust out.
Water connection with shut-off valve and quick connector.
Lightweight, easy to maneuver, fast-cutting concrete cutter for deep cutting and cutting corners.
When you need to cut deep into concrete, reach for the Boss – the STIHL GS 461 ROCK BOSS®. This revolutionary concrete cutter changes the game with enhanced performance that cuts up to 15.7” deep into concrete, reinforced concrete (with rebar up to ½ inch), cinder blocks, masonry bricks, asphalt and soft stone. And it does all of this in a compact, lightweight package that is easy to maneuver and transport.
It’s a great addition to your construction site when you need to get serious with concrete materials. And because it’s a STIHL, you know it delivers excellent performance. The GS 461 ROCK BOSS® features include a low exhaust emission engine, HD2 heavy-duty air filter, advanced water controls, low vibration, and our exclusive Diamond Abrasive Chain.
Hazard Warnings
General Power Tool
Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products. STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only. Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products. STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
Proposition 65 - EnglishThis product contains chemicals known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov
E-10 StatementNote: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.
