STIHL ROLLOMATIC® ES Light
A guide bar that has 30% less weight in comparison with STIHL ROLLOMATIC® ES Super guide bars.
The STIHL ROLLOMATIC® ES Light guide bar has 30% less weight in comparison with STIHL ROLLOMATIC® E Super guide bars. To reduce weight, the solid bar (made of the same tough wear-resistant steel) is milled out and filled with aluminum to make it up to 30% lighter than the ES Super. The reduced weight improves the chainsaw balance and decreases operator fatigue, especially on longer bars. A replaceable sprocket nose assembly is also incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower. This type of construction is an advantage where extensive use is made of the bar nose (i.e. limbing and boring). All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies. And the sprocket nose assembly can be replaced several times before the whole bar is due for replacement, increasing the guide bar’s service life.
Applications: For high-performance woodcutting with larger displacement professional STIHL chainsaws.
STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads.
Note: The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.
| STIHL ROLLOMATIC® ES Light Specifications | |
| AVAILABLE LENGTHS | 20", 25" |
| PITCH | 3/8" |
Important Information
WARNING! The occurrence called “kickback” can cause serious
or fatal injury. Always read the instruction manual carefully before
using your saw. STIHL uses a green and yellow color-coding
system to help you select a powerhead, bar and chain combination
that complies with the kickback requirements of ANSI
Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/
ANSI Standard B175.1 (electric chainsaws). Ask your STIHL
dealer about safe operating procedures and the advantages of
the STIHL Quickstop® chain brake, STIHL Quickstop® Plus (Q) additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback
saw chains.
STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.
* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
We Also Suggest
-
-
Complete Filing Kits
Includes file guide, depth gauge, round file, flat file and two file handles in tool pouch. Kits available for the following chain types: STIHL PICCO™ Mini; 1/4" pitch chain; .325" pitch chain; 3/8" pitch chain; .404" pitch chain.
-
-
-
No-Spill® Fuel Containers
No-Spill® fuel containers advance convenience and quality in gasoline-can design by reducing emissions of hydrocarbons from evaporation, permeation and spillage. This helps protect the environment as well as saves you on fuel costs due to waste. Each container is molded from fluorinated, high molecular weight material for low permeation. The thumb-button flow control allows filling even smaller-sized tanks reducing the risk of spilling and is designed to stop the flow automatically, when the tank becomes full, to prevent overflowing. Built on a wide, stable base for less likelihood of upsets and equipped with child-resistant closures, all No-Spill® containers comply with both EPA and CARB requirements. With 1¼-gallon, 2 ½-gallon and 5-gallon sizes available, you’re sure to find one that fits your needs.
-
-
-
Bar Scabbards
With our newly designed STIHL scabbards, you can keep your STIHL chainsaw and pole pruner better protected during transport and storage. Each scabbard is uniquely designed to fit a specific guide bar length, offering 100% coverage. And while we were at it, we made them even easier to install – giving the scabbards a funnel-shaped opening and improved clamping.
-
For Your Safety
-
-
Pro Mark™ Apron Chaps - 9 Layer
For heavyweight protection that won’t weigh you down, choose Pro Mark™ Apron Chaps - 9 Layer from STIHL. They’re rugged, yet comfortable to wear and easily fit over your work clothes. Sewn into the legs of the chaps are nine layers of Avertic® Pro by Engtex®, a cut-retardant material designed to reduce the risk or severity of injury to the body parts covered by the pads in the event of contact with the rotating saw chain of a gasoline-powered chainsaw. The open-back design of these chaps makes them a great choice for hot working conditions. These Pro Mark™ apron chaps provide three additional layers of Avertic® Pro by Engtex® cut retardant material than our standard apron chaps. STIHL chainsaw protective apparel is also wash and wear, unlike some other brands that require dry cleaning or light surface cleaning.
The STIHL Pro Mark™ Protective Apparel is best paired with Professional STIHL units. This line of personal protective apparel is designed for professional users, helping protect against injuries they may face during frequent use.
Available color: High Visibility Orange
Available lengths: 32", 36", 40"
See it in action!
-
-
-
Forestry Helmet System
The woods can hold many dangers. Stay one step ahead with the Forestry Helmet System from STIHL. The protection starts with a hard shell of ABS thermoplastic. It gets even better with a six-point, ratchet-style suspension system that absorbs shock and keeps the helmet stable while you work.
The system also features a Cool Guard sweatband to keep perspiration out of your eyes, as well as a built-in rain gutter to direct rain away from your face during inclement weather. Adjustable hearing protectors comfortably reduce noise while an epoxy-coated steel full-face screen helps protect from flying debris.
Hard hat meets ANSI Z89.1-2003 Type 1 Class G. Hearing protectors meet ANSI S3.19-1974 and have a Noise Reduction Rating (NRR) of 24 dB(A).
-
-
-
High Performance PRO Gloves
STIHL High Performance PRO Gloves are ideal for outdoor professionals that demand more from their hands. Elastic slip-on cuffs provide a snug, comfortable fit. Padded palm and knuckle guards protect against abrasion. Reinforced PVC grip overlays deliver a strong grip while enhancing durability.
Materials: Breathable spandex material, synthetic leather palms and fingers, thermoplastic rubber knuckle guards, elastic cuff, reinforced PVC at grip and wear points
Available sizes: M, L, XL
-
