My Preferred Dealer
Find a Specific Product: Oils, Lubricants and Fuels

Platinum Bar and Chain Oil

A bar and chain oil formulated to adhere and reduce wear to the chainsaw’s bar and chain.

Platinum Bar and Chain Oil
Platinum Bar and Chain Oil is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Excellent Product I have tried cheaper brands with poor results. This oil keeps the chain oiled and bar cooler.
Date published: 2018-08-04
Rated 5 out of 5 by from Platinum Protection for my Equipment I’m running this in all of my saws and it’s the best I’ve ever seen. It’s a clear color so pay attention when filling the tank, but the performance is top shelf! I’ve used it well below freezing and it flows just fine, especially when the Saw is good and warm. It protects in both the hot/humid weather and the cold. I do t use separate bar lines for cold weather any more. Just the platinum for all conditions! It does not clog up my tank or pump either. The tackiness is great and it stays in place very well even at high chain speeds.All in all it’s the best chain/bar Lube I’ve ever used and it’s well worth the modest cost difference.
Date published: 2018-07-05
Rated 5 out of 5 by from Platinum Bar Oil is a CUT-ABOVE the Rest ! I was skeptical at first browse of this product. I thought, at the time, there was no good reason to swap from my many years of using Woodcutter Bar & Chain Oil. This is my first year using Platinum Bar & Chain Oil. What I have discovered is that it takes less overall quantity of this Oil to achieve the same level of lubrication provided by it's predecessor. Another benefit is this Oil is not as temperature-sensitive as the Woodcutter Bar & Chain Oil is. In other words, it will perform satisfactorily at somewhat lower temperatures before you ultimately need to switch over to Winter Bar & Chain Oil. It will take you some time to get used to having less visible Oil on your Chain, but the proof of proper lubrication is a cool-running Bar that isn't burning the paint off!However, if you have one of the newer Saws, be prepared to turn-up the Oil Quantity setting to near maximum level...even when using Platinum Bar & Chain Oil. I found the "E" setting on my new MS-362,461, & 661 to be too lean with 20", 25", & 32" Bars, respectively. So, I guess this means that the Woodcutter Bar & Chain Oil may be an unsatisfactory choice for proper lubrication on the newer Saws with lower-volume Oil Pumps & newer Bars with smaller Oil Delivery Holes.
Date published: 2018-06-25
  • y_2019, m_8, d_17, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_platinumoil, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_stihl