My Preferred Dealer
Oils, Lubricants and Fuels

Accessories - Oils, Lubricants and Fuels

Quality fuel specially formulated to keep your STIHL running strong

When you own a STIHL, you care about quality and demand the best performance. Keep your 2-cycle engine in peak condition with a regular maintenance routine and premium-quality STIHL oils, premixed fuels and lubricants.

STIHL 2-cycle engine oils are specifically formulated for all STIHL chainsaws and offer outstanding engine cleaning and lubrication. A considerable amount of effort has been put into developing STIHL engine oil, bar and chain oil, and maintenance chemicals; they are designed to offer maximum protection under the most severe professional applications. They are also ideal for low-emission 2-cycle engines. 

Eliminate the hassle of mixing your own fuel mixture with STIHL MotoMix® premixed fuel. It’s clean, convenient and can be stored longer than fuel you mix on your own. STIHL MotoMix® is created with premium high-octane gasoline and the superior protection of STIHL HP Ultra Oil.
  1. 1 year ago
    Excellent premix for my Stihl chainsaw and trimmer
    This premix burns very clean in my Stihl chainsaw and Stihl trimmer. It is almost completely smokeless and comes in a steel can for long term storage. You do need to use a spout for the gallon can or it is messy. This is just common sense. I bought 4 quarts with my saw last year. Never put this fuel in plastic gas cans for storage. It will degrade quick The steel can cannot rust with premix fuel in it. Fuel degrades very quick in plastic cans. VP Racing Fuels says fuel can be stored in steel ... read more cans for years without degrading.
  2. 4 years ago
    Perfect for a rarely used MS-460
    I have a variety of Stihl chain saws for different applications. From the HT-100 to a 'baby' MS-180; and I use them a lot on my orchard. What I use infrequently is my MS-460. When I need it - it must work. This means there is trouble or the job is very tough. I heard that All the local fire fighters use pre-mix Stihl gas in their MS-460R and other Stihl equipment so I decided to give it a run. I never looked back. This is the only gas I use in my expensive but some times very necessary MS-460!
  3. 6 years ago
    excellent product for your stihl
    I use this fuel in my saws and weed wacker. Although it's a little more expensive then mixing your own fuel the perks of using this fuel are unbelievable. My saws only get used in the fall/winter months for firewood and after a full summer of sitting you can go out and fire them off with no hassle. Not only do they start right up they also run as if you just used them yesterday. Excellent work on stihls behalf.
  1. 3 years ago
    The only 2 cycle oil I use in my chainsaws and weedeater
    I use Stihl Performance Oil in all my tools - 009, 044, MS 660 and FS85 Pro and I have not had any motor issues, all still have great compression with very little smoke from the exhaust. The 009 and 044 are 15 years + old and both have had 1 spark plug change in all this time.I check the plugs every month, nice brown tint indicating a good burn of the fuel and oil. I have replaced bars and chains numerous times as these saws get worked every other week but the motors run like new. Very pleased ... read more with this oil......
  2. 3 years ago
    Great oil
    Great high quality oil for a very reasonable price
  3. 2 years ago
    My favorite 2 cycle oil
    This oil is excellent. My Stihl equipment runs so much better with this oil. I recommend this oil to anyone.
  1. 5 years ago
    Consistent Viscosity and Environmentally Friendly
    I appreciate this Bar Oil and know that I'm not getting misted with petroleum products every time I use my saw and that my saw dust can break down into mulch with no poison on my plants! I can see that old saw dust is breaking down into rich soil over time and this bar oil does not inhibit the biological process at all. Compared to other bar oils BioPlus lubricates better, stays consistent in it's viscosity through every temperature I've worked in and has very little smell. It's truly a winner ... read more of a product! I have used it for years and will continue to buy it. I do not worry about my land and the plants on it when I spread sawdust around. I know nature will take care of it. As far as My Own biology is concerned, if I avoid poisons today, it prevents health problems tomorrow. I'm willing to keep taking this step towards healthier chainsawing.
  2. 6 years ago
    Good product, but pricey
    I like this oil for it's health and environmental benefits. It also has very good cold flow characteristics. The regular oil flows very slowly and is hard to poor in winter conditions. This oil flows well and is easy to pour. I haven't seen any difference in wear on bar or chains through 2 gallons of use.
  3. 6 years ago
    healthier for me, lubes the saw well
    Unfortunately pricey. Any chainsaw sprays you with bar oil. I like the fact that I smell like french fries at the end of the day rather than petroleum. I would rather breath and bathe in vegetable oil than petrol. The oil washes out of your clothes easily with no residual smell in an ordinary wash. The saw seems to like it just fine. It seems to have a higher viscosity and it seems to use less, but I have not done a scientific side by side test with the regular bar lube. Hard to find product, ... read more dealers are not stocking it.
  1. 12 months ago
    Excellent Product
    I have tried cheaper brands with poor results. This oil keeps the chain oiled and bar cooler.
  2. 1 year ago
    Platinum Bar Oil is a CUT-ABOVE the Rest !
    I was skeptical at first browse of this product. I thought, at the time, there was no good reason to swap from my many years of using Woodcutter Bar & Chain Oil. This is my first year using Platinum Bar & Chain Oil. What I have discovered is that it takes less overall quantity of this Oil to achieve the same level of lubrication provided by it's predecessor. Another benefit is this Oil is not as temperature-sensitive as the Woodcutter Bar & Chain Oil is. In other words, it will perform ... read more satisfactorily at somewhat lower temperatures before you ultimately need to switch over to Winter Bar & Chain Oil. It will take you some time to get used to having less visible Oil on your Chain, but the proof of proper lubrication is a cool-running Bar that isn't burning the paint off! However, if you have one of the newer Saws, be prepared to turn-up the Oil Quantity setting to near maximum level...even when using Platinum Bar & Chain Oil. I found the "E" setting on my new MS-362,461, & 661 to be too lean with 20", 25", & 32" Bars, respectively. So, I guess this means that the Woodcutter Bar & Chain Oil may be an unsatisfactory choice for proper lubrication on the newer Saws with lower-volume Oil Pumps & newer Bars with smaller Oil Delivery Holes.
  3. 1 year ago
    Platinum Protection for my Equipment
    I’m running this in all of my saws and it’s the best I’ve ever seen. It’s a clear color so pay attention when filling the tank, but the performance is top shelf! I’ve used it well below freezing and it flows just fine, especially when the Saw is good and warm. It protects in both the hot/humid weather and the cold. I do t use separate bar lines for cold weather any more. Just the platinum for all conditions! It does not clog up my tank or pump either. The tackiness is great and it stays in place ... read more very well even at high chain speeds. All in all it’s the best chain/bar Lube I’ve ever used and it’s well worth the modest cost difference.
  1. 1 year ago
    For the really cold days
    I keep a quart around for the really cold days. In all honesty when the saw is warmed up I just run the Platinum Bar Lube and I haven’t had any issues. For the really really cold days this does flow better through the pump and onto the bar. It protects well but I switch when the temperature gets above 20F.
  2. 1 year ago
    Winter Bar & Chain Oil Will Flow When Your Coffee's Frozen !
    I use Winter Bar & Chain Oil in place of Platinum Bar & Chain Oil on the coldest of cutting days. The summer Oils will turn to molasses or jello at some point. The end result of that could be a "toasted" Bar! If you are still using Woodcutter Bar & Chain Oil, your switch-over to Winter Bar & Chain Oil should occur sooner as it thickens quicker than Platinum Bar & Chain Oil will at a given temperature. Remember, the newer Saws deliver less Oil to the Bar & Chain than the older models do, so ... read more your switch-over point may be more critical depending which Oil & Saw you have. Stihl, please color-code these Oils so we know what is in our Saw!!!
  1. 3 years ago
    this is the one
    bought the 2 1/2 gallon jug yesterday with my new 94r (review forthcoming on that) used it for the first time yesterday and IT ACTUALLY WORKS of all the other newer type cans out there this one actually works as it should ya push the button the gas flows ya let go of it it stops i highly reccomend it
  2. 6 years ago
    Chuck your other gas cans!
    A glowing review of a gas can? Yes sir! Other spill-mitigation systems can be cheap, difficult to use, and easy to break. I've gone through several. But this one? Push the button. No twisting cheap plastic rings into cheap plastic grooves and praying it doesn't break, no frustration at all actually, and I love the clear stripe that lets you see exactly how much gas is in the thing. It's a point-and-push operation.
  3. 1 month ago
    Good can
    Easily fill tanks on all my tools. Vents well and doesn’t burp like other cans. Quick easy flow stop to prevent over filling. Viewing window is nice, can see how much gas is left and nice when mixing 2 stroke
  • 2019-07-23
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_17
  • loc_en_US, PRD
  • clientname_STIHL, pc_6, tc_6
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 15ms
  • SPOTLIGHTS, CATEGORY