My Servicing Dealer
Cut-off Machines

Accessories - Cut-off Machines

Renowned quality for the jobsite

There are no tougher jobs than those on construction sites and demolition operations. And a STIHL Cutquik® cut-off machine can be an ideal companion on those jobs. STIHL cut-off machines are number one worldwide and they deliver superior power and convenient controls.

So make sure you have construction tools on the job site that deliver. Get STIHL quality, dependability and power today.

Note: STIHL recommends use of fuel with no more than 10% ethanol content. Using fuel with greater than 10% ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
  1. 3 years ago
    champ
    I am a demolition contractor and I have many chop saws and I by far can say this ts420 I a good move the only down fall is if you do not know haw to start it you will faile I put all my men thru training and we have no problems..... Check you filter and do a monthly inspection and you will be fine.
  2. 4 years ago
    Great on my back.
    I initially wanted to purchase a TS 700, but my Stihl dealer did not have one in stock. I needed a cut off saw asap. to finish a raised patio project. My other Brand cut off saw's carb. finally gave up after years of reliable service. At first, I thought I made a mistake purchasing a less powerful saw. To my surprise this saw starts right up, is light as a feather and cuts segmental retaining wall blocks and pavers like a champ.
  3. 4 years ago
    I fell for peer pressure.
    Everyone kept talking about the TS 420. I couldn't help it. I bought one right away. The description is accurate. All the other cut-off machines I've used I can easily compare to this one. I think I might get a second TS 420 because of the esteem this one has already given me. As I leave this review to attend a gala I urge anyone else interested to get the super famous TS 420. It will change your life.
  1. 4 years ago
    The only saw I care to use
    I have ran all makes and sizes of saws over alot of years and if given a chance to chouse a saw this is the saw I took with me it cuts 50% faster than smaller saws and I like the handal All the way at the back you can get a lot of leverage with it there it also runs just as good upside down too also the drive belt is the best out there they run a long time with no matiance and never had it slip when using water they start good and idle vary well too if money was not a object this is the only saw ... read more I would have on my truck if you are out to make money this saw will save you time and money go and get yourself one and you won't regret it
  2. 4 years ago
    The Stihl TS700 is the best choice for all your cut-off saw needs, no matter how demanding.
    I typically use a cut-off saw to install vehicle loop detectors in asphalt and concrete driveways and roadways. In the past I have rented a Makita saw from a local rental agency. Much to my despair, this saw didn't have enough power to allow me to keep it in the material being cut very long at all. I would have to plunge the saw after holding down the trigger all the way and would only be able to cut a few inches at a time. This was very time consuming and very physically exhausting, especially ... read more on my back. A good friend of mine owns an older TS700 with a quick cart, and suggested I borrow his saw to see how I liked it. After completion of a job in literally 25% of the time it took with the rented saw with no pain, I was sold. The TS700 did not bog at all in the hot asphalt. Not only did I purchase a TS700 saw with a quick cart, but I also purchased a BG86 blower to keep the dust down while using the TS700. So now I have a Stihl chainsaw, weed trimmer, cut-off saw, and blower. Stihl products are definitely the way to go for professional grade tools with the the best performance and dependability in the industry. I'm sold!
  3. 8 months ago
    I do believe the best value out there
    I have been using stihl products for over 30 + years. We have two ts 700 they are dependable smooth cuting tool.I have personaly went though over 100 + 14 inch concret cutting diamonds blades on one saw. In the past four years we have done general maintenance spark plugs air fliters and a occasional pull rope. ps. The ts 700 is very durable saw.
  1. 4 weeks ago
    Gets it done.. QUICK
    worked great for what I need to do! Cutting 4-8 thick concrete is relatively easy with this thing.
  2. 3 years ago
    Great power
    I just picked up the ts-800 for a commercial job of mine,I had to cut 200 feet of concrete out. The power of the saw and the water attachment worked well! I suggest you buy the cart for the saw too.
  3. 1 month ago
    Product works great
    I am a plumber and I use this machine to cut through slabs to get to my drain lines. I have used other machines before. I rented for a while before I bought so I have a guideline for this review as well. This was a great purchase. I have had it for about four years. I have cut about 2000 feet with it and have not had any problems. My first time using it I had to learn a few things out so it took a little bit to get it started. Ever since then starting it is a breeze. This machine once you prime ... read more the carburetor starts on the second or third pull even after it has sat for months. I use ethanol free fuel just so you guys know. I love this machine. It is fun to use. The only reason I did not give it a full score on the power is because when you use a 16'' blade it will bog down in thick slabs. You just have to go a little bit slower and then it is fine. Other machines I have found could not come close to matching the power of this machine. I would recommend this to anyone. It is way better then renting and I bet if I where to sell this right now I could get close to what I paid for it. They hold there value. Also. I bought the wheels for the machine. I don't know why it doesn't come with the machine because it doesn't roll without them. It was a cheap add on anyway so it is not a big deal to buy. The wheels sit off the ground a little so when it is just sitting it is on its pads and doesn't roll or move when idling. Great Machine. It is one of my favorite tools in my business. You know what. Nevermind. It is my favorite.
  1. 2 years ago
    its time to come out with a saw for rhe brick layers
    I've been a bricklayer for 35 years an when I seen this saw I thought to myself it's about time that they came out with this saw that's light and manageable to 2000 a wall it is very impressive but they need another inch on a saw blade very impressed but it doesn't cut through a brick if that ever is done I would buy it in a minute matter of fact I know 10 bricklayers that would buy it right away start thinking about tand I guarantee it your sales would increase 50%he bricklayers
  2. 6 months ago
    Great saw compact and lightweight
    This saw is good, lightweight and compact vs a gas powered. My boss (our mayor) has one he uses for his masonry business that we borrowed for our village to do some cutting on 4" ductile iron water line while replacing a fire hydrant. Saw had no clue what it was cutting and went through it very easy. Only thing to make this saw better would be a shroud that you can position to help get a change of angles for easier cutting approaches.
  3. 2 years ago
    Better than expect,
    We bought 2 extra batteries and a extra charger so we could cut continuously. Be sure to have extra blade as well, many stores do not carry a blade that will fit. In the process of buying another unit.
  • 2017-05-29
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_12
  • loc_en_US, PRD
  • clientname_STIHL, pc_6, tc_4
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 250ms
  • SPOTLIGHTS, CATEGORY
  • Seasonal Landscaping Tips
  • Special Offers from Your Local STIHL Dealer
  • Guides & How-To Videos
  • Maintenance Tips