STIHL ROLLOMATIC® E Mini Light
The STIHL ROLLOMATIC® E Mini Light is a general-grade laminated guide bar made of high-grade steel. Two metal plates are electrically welded together to provide stability. To reduce weight, it is completely hollowed out after being welded and is filled with fiber-reinforced polymide. The 14” bar is 25% lighter than a comparable conventional guide bar. This bar has excellent rigidity for efficient cutting and better balance during limbing operations and is designed for use with PMM3 saw chain. A sprocket is incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower. This type of construction is an advantage where extensive use is made of the bar nose (i.e. limbing and boring). All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies. And the star-shaped sprocket can be replaced several times before the whole bar is due for replacement, increasing the bar’s service life.
Applications: This bar is primarily intended for use by arborists.
STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads.
Note: The actual listed guide bar length can vary from the effective cutting length depending upon which power head it is installed.
You Will Also Need
-
-
No-Spill® Fuel Containers
No-Spill® fuel containers advance convenience and quality in gasoline-can design by reducing emissions of hydrocarbons from evaporation, permeation and spillage. This helps protect the environment as well as saves you on fuel costs due to waste. Each container is molded from fluorinated, high molecular weight material for low permeation. The thumb-button flow control allows filling even smaller-sized tanks reducing the risk of spilling and is designed to stop the flow automatically when the tank becomes full to prevent overflowing. Built on a wide and stable base for less likelihood of upsets and equipped with child-resistant closures, all No-Spill® containers comply with both EPA and CARB requirements. With 1¼-gallon, 2 ½-gallon and 5-gallon sizes available, you’re sure to find one that fits your needs.
-
-
-
Bar Scabbards
With our newly designed STIHL scabbards, you can keep your STIHL chain saw and pole pruner better protected during transport and storage. Each scabbard is uniquely designed to fit a specific guide bar length, offering 100% coverage. And while we were at it, we made them even easier to install – giving the scabbards a funnel-shaped opening and improved clamping.
-
For Your Safety
-
-
Camouflage Protective Chaps
From cutting to hunting, camo-colored Apron Chaps from STIHL are a great choice for those who want to get the most out of their gear. When at work, their six layers of cut-retardant Engtex® material are designed to clog the sprocket and stop the saw chain on a gasoline-powered chain saw in case of accidental contact with the rotating saw chain. When at play, a pocket near the belt provides convenient storage for shells and other hunting essentials as well as protection when walking through brush. STIHL chain saw protective apparel is also wash and wear, unlike some other brands that require dry cleaning or light surface cleaning.
Available color: Green Camouflage, Orange Camouflage
Available lengths: 32", 36", 40”
NOTE: Chaps are measured by overall length from the waist down. STIHL chaps have a tough outer shell of oil/water-resistant nylon, treated with rain/stain repellent.
-
-
-
STIHL Forestry Boots
Your work can take you to some of the toughest terrain. STIHL Forestry Boots are lined with two layers of cut-retardant Kevlar®, helping protect you from falling objects and hazards underfoot that can cause punctures. The boots are also flexible and water-resistant thanks to a leather upper construction. Foam padding from the heel to the wide steel toe enhances comfort while its Vibram® soles provide excellent abrasion resistance.
Meets OSHA Reg. 1910.266
Available sizes: 6-13 (in half-size increments), 14
NOTE: Women should order two sizes smaller than their normal shoe size.
-
-
-
STIHL® Forestry Helmet System
The woods can hold many dangers. Stay one step ahead with the Forestry Helmet System from STIHL. The protection starts with a hard shell of ABS thermoplastic. It gets even better with a six-point, ratchet-style suspension system that absorbs shock and keeps the helmet stable while you work.
The system also features a Cool Guard sweatband to keep perspiration out of your eyes, as well as a built-in rain gutter to direct rain away from your face during inclement weather. Adjustable hearing protectors comfortably reduce noise while an epoxy-coated steel full-face screen helps protect from flying debris.
Hard hat meets ANSI Z89.1-2003 Type 1 Class G & C. Hearing protectors meet ANSI S3.19-1974 and have a Noise Reduction Rating (NRR) of 24 dB(A).
-
-
-
Pro Mark™ Forestry Helmet System
The Pro Mark™ Forestry Helmet System is designed to offer premium protection to your most premium asset –your head. The hardhat features a lightweight ABS thermoplastic shell and a six-point ratchet-style suspension system for improved shock absorption and overall comfort. For hearing protection, we’ve used our NRR 25 earmuffs to help block out tool and engine sound. The visor is a durable steel mesh full-face screen, designed to protect your face from flying debris. And a built-in rain gutter directs rain away from your face during inclement weather.
Meets ANSI requirements for earmuffs (ANSI S3.19-1974) and have a Noise Reduction Rating (NRR) of 25 dB(A), visor (ANSI Z87.1-2003) and hardhat (ANSI Z89.1:2009). Type 1 Class G & C
-
