TS 480i STIHL Cutquik®
Electronically controlled fuel-injection technology gives the TS 480i STIHL Cutquik® 17% more power as compared to the STIHL TS 410.
The TS 480i STIHL Cutquik® cut-off machine features an electronically controlled fuel-injection system, increasing the power by 17% as compared to the STIHL TS 410.
Powerful, lightweight and well-balanced, the STIHL TS 480i is designed for superior handling during the toughest jobs (maximum wheel size is 12 inches). With low exhaust emissions, the engine provides optimal torque throughout the RPM range and eliminates the need for a choke, simplifying the starting procedure. The standard electronic water control feature allows for easy and efficient water flow adjustment while operating. The X2 air filtration system is virtually maintenance-free and maintains an incredible 99.96% cleaning efficiency.
At STIHL, we dedicate considerable resources toward developing new and innovative technology that increases efficiency and improves performance for our line of construction equipment. STIHL Cutquik® cut-off machines are known for superior fuel efficiency, operator comfort, powerful and precise cutting performance and much more. Check out a few of the features that you’ll find on every STIHL Cutquik® cut-off machine:
- Electronic Ignition provides easier starting and smoother running.
- Anti-Vibration System minimizes the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- Ergonomic Grip provides an optimal comfortable grip in many working positions.
- High-Performance Cooling System for superior airflow and heat dissipation.
- Quick Disconnect Water Kit reduces dust when cutting concrete when attached to a water supply.
- Reversible Cutting Arm lets you cut in the inboard or outboard position.
- Semi-Automatic Belt Tensioner features a spring-loaded arm that automatically adjusts the drive belt to the correct tension with the turn of a wrench.
- 2-Ring Pistons improve engine efficiency and hold compression longer than 1-ring pistons. Also they transfer heat from the piston to cylinder better, helping engine stay cooler and last longer.
- Long-Life Engine Cylinders provide optimal cooling, lubrication and more power output per cubic centimeter of engine displacement for maximum wear life.
- On/Off Switch is conveniently located on top of handle and recessed to prevent accidental shutdown.
- High-tech Polymer Housings are lightweight, withstand greater impact and are corrosion resistant.
- Protected Decompression Valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
- Protected Spark Plug is protected yet easy to change.
- Protected Throttle Trigger helps prevent damage.
- Throttle Trigger Lockout must be depressed before the trigger can be activated.
- Bayonet-Style Fuel Cap with dust-resistant seal and retainer for easy use, even with gloves.
- Upright and Enlarged Fuel Port for easy fueling.
See your local STIHL Dealer for a hands-on demonstration of all the powerful cut-off machine features. While you’re there, stock up on STIHL protective apparel, including construction hard hats, anti-vibration gloves, leather chaps and more.
STIHL is the #1 selling brand of gasoline-powered handheld outdoor power equipment in America and the Number One selling brand of chain saws in the world*. Sold and serviced through our network of independent Dealers, STIHL power tools deliver versatility and dependability. STIHL tools are German engineered, and many are built right here in America and exported to over 90 countries around the world.* To find one of the over 8,000 STIHL Dealers near you, visit the Dealer Locator.
*A majority of STIHL products are built in the United States from domestic and foreign parts and components. "Number one selling brand" is based on syndicated Irwin Broh Research as well as independent consumer research of 2009-2013 U.S. sales and market share data for the gasoline-powered handheld outdoor power equipment category combined sales to consumers and commercial landscapers ©2014 STIHL.
|TS 480i STIHL Cutquik® Specifications - Professional Use|
|DISPLACEMENT||72.2 cc (4.41 cu. in.)|
|ENGINE POWER||3.9 kW (5.2 bhp)|
|WEIGHT*||10.0 kg (22.0 lbs.)|
|FUEL TANK CAPACITY||725 cc (24.5 oz.)|
|ENGINE SPEED||9,000 rpm (Elec. Gov.)|
|MAX. SPINDLE SPEED||5,350 rpm|
|MAXIMUM WHEEL SIZE||300 mm (12")|
|MAXIMUM CUTTING DEPTH||100 mm (3.9")|
|*Weight includes water attachment and guard.|
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL dealers are for distribution in the United States only.
Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
Electronic Water Control (EWC)
Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
Semi-Automatic Belt Tensioning
With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
Electronically Controlled Fuel Injection System
The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull.
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Common Features for STIHL Cutquik® Cut-off Machines
View the features common to many STIHL Cutquik® Cut-off Machines.
You Will Also Need
Any pro knows that water helps lubricate the cutting wheel and reduces dust when cutting concrete. But sometimes water isn’t available. When you need water for wet-cutting and a pressurized water source is not available, the pressurized water tank is a must. This tank holds 2.6 gallons of water, and is extremely easy to pressurize with the hand pump and footplate. A built-in pressure gauge helps you keep the right pressure to keep the water flowing through the transparent hose. The translucent tank makes it easy to see when you need a refill.
Keep your cut-off machine accessories easily accessible, convenient and protected. The STIHL carrying case is made from heavy-duty metal and has special compartments to hold all STIHL Cutquik® cut-off machines, cutting wheels and accessories. The same case will also hold the MS 460 R STIHL Magnum® “Rescue” chain saw. The case has large handles for easy portability and features vented louvers.
Maintain control and consistency on difficult cuts with the TS Wheel Kit. The kit consists of two small wheels that mount directly to most STIHL Cutquik® cut-off machines. These wheels help with floor cutting when a full cart application isn’t warranted. Kit fits most STIHL cut-off machines including the TS 410, TS 420, TS 500i, TS 700 and TS 800.
No matter how you slice it (or trim it or shred it), there’s no better protection for your high performance 2-stroke engine than STIHL HP Ultra. This 2-cycle engine oil has outstanding engine cleaning characteristics, plus “ultra” lubricating qualities that’s superior to other 2-cycle engine oils. This fully synthetic oil is also highly biodegradable, degrading by 80% in 21 days. We’re so confident this oil will protect your engine, we’ll double your STIHL limited warranty* when you use it. It’s that good.
*Double your warranty when you include 6 bottles of STIHL HP Ultra Oil or 6 cans of STIHL MotoMix® Premixed Fuel with your STIHL product purchase. Double limited warranty protection applies to STIHL gasoline-powered products purchased and registered for personal non-income producing, family and household purposes only. Other restrictions apply. See dealer for details.
For Your Safety
Combining first-class durability and all-day comfort, the STIHL Construction Hard Hat System gives your projects a proper foundation in protection. The system starts with a hard hat made from tough ABS thermoplastic. A six-point ratchet-style suspension system improves comfort, as well as shock absorption. The system also features a Cool Guard sweat band and rain gutters, keeping both perspiration away from your eyes and precipitation away from your neck. Its comfortable, adjustable hearing protection help keep down job site noise while its clear, PETG full-face shield helps keep your face protected from flying debris.
Meets ANSI Z89.1-1997 Type 1 Class. Hearing Protectors meet ANSI S3.19-1974 Noise Reduction Rating (NRR) of 23 dB(A). Full Face Shield meets ANSI Z87.1-1989.
NOTE: Also available as a hard hat only. Meets ANSI Z89.1-1997 Type 1 Class G & C.
Reduce the vibration from handheld machines with anti-vibration gloves from STIHL. The palms and fingers are specially designed to absorb vibration energy, helping you stay steady throughout your workday.
Classifications: Meets anti-vibration standard ISO 10819:1996 and ANSI S2.73.
-TRm at .72 for mid-frequency range
-TRh at .55 for high-frequency range
Materials: 7-gauge knit shell, shock-absorbing material and elastic wrist
Available sizes: L, XL
Designed for use with cut-off machines, these top-quality STIHL Leather Chaps provide maximum protection from abrasion, spatter and sparks when cutting ferrous metals. The chaps cover from the waist down, and feature quick-release buckles as well as easily adjustable nylon straps. Not for use with chain saws.
Available color: Natural Leather
Available sizes: One size fits most
Available length: 40"