TS 700 STIHL Cutquik®
This cut-off machine is designed from top to bottom for extended service cutting.
The 14” STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, five-point dual element vibration control system built right into the handle, and a semi-automatic belt tensioner with an innovative ribbed belt. Its X2 filtration system is low maintenance and cleans airflow with nearly 100 percent efficiency, reducing downtime for filter maintenance. Each component on this machine was meticulously engineered with demanding professionals in mind.
NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.
At STIHL, we dedicate considerable resources toward developing new and innovative technology that increases efficiency and improves performance for our line of construction equipment. STIHL Cutquik® cut-off machines are known for superior fuel efficiency, operator comfort, powerful and precise cutting performance and much more. Check out a few of the features that you’ll find on every STIHL Cutquik® cut-off machine:
- Electronic Ignition provides easier starting and smoother running.
- Anti-Vibration System minimizes the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- Ergonomic Grip provides an optimal comfortable grip in many working positions.
- High-Performance Cooling System for superior airflow and heat dissipation.
- Quick Disconnect Water Kit reduces dust when cutting concrete when attached to a water supply.
- Reversible Cutting Arm lets you cut in the inboard or outboard position.
- Semi-Automatic Belt Tensioner features a spring-loaded arm that automatically adjusts the drive belt to the correct tension with the turn of a wrench.
- 2-Ring Pistons improve engine efficiency and hold compression longer than 1-ring pistons. Also they transfer heat from the piston to cylinder better, helping engine stay cooler and last longer.
- Long-Life Engine Cylinders provide optimal cooling, lubrication and more power output per cubic centimeter of engine displacement for maximum wear life.
- On/Off Switch is conveniently located on top of handle and recessed to prevent accidental shutdown.
- High-tech Polymer Housings are lightweight, withstand greater impact and are corrosion resistant.
- Protected Decompression Valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
- Protected Spark Plug is protected yet easy to change.
- Protected Throttle Trigger helps prevent damage.
- Throttle Trigger Lockout must be depressed before the trigger can be activated.
- Bayonet-Style Fuel Cap with dust-resistant seal and retainer for easy use, even with gloves.
- Upright and Enlarged Fuel Port for easy fueling.
See your local STIHL Dealer for a hands-on demonstration of all the powerful cut-off machine features. While you’re there, stock up on STIHL protective apparel, including construction hard hats, anti-vibration gloves, leather chaps and more.
STIHL is the #1 selling brand of gasoline-powered handheld outdoor power equipment in America and the Number One selling brand of chain saws in the world*. Sold and serviced through our network of independent Dealers, STIHL power tools deliver versatility and dependability. STIHL tools are German engineered, and many are built right here in America and exported to over 90 countries around the world.* To find one of the over 8,000 STIHL Dealers near you, visit the Dealer Locator.
*A majority of STIHL products are built in the United States from domestic and foreign parts and components. “Number one selling brand” is based on syndicated Irwin Broh Research (commercial landscapers) as well as independent consumer research of 2009-2011 U.S. sales and market share data for the gasoline-powered handheld outdoor power equipment category combined sales to consumers and commercial landscapers.
Important Information
WARNING! Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type.
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL dealers are for distribution in the United States only.
| TS 700 STIHL Cutquik® Specifications | |
| DISPLACEMENT | 98.5 cc (6.0 cu. in.) |
| ENGINE POWER | 5.0 kW (6.7 bhp) |
| WEIGHT* | 11.6 kg (25.6 lbs.) |
| FUEL TANK CAPACITY | 1200 cc (40.6 oz.) |
| ENGINE SPEED | 9,300 rpm (Elec. Gov.) |
| MAX. SPINDLE SPEED | 5,350 rpm |
| MAXIMUM WHEEL SIZE | 350 mm (14") |
| MAXIMUM CUTTING DEPTH | 125 mm (4.9") |
| *Weight includes water attachment and guard. | |
Important Information
WARNING! Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type.
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL dealers are for distribution in the United States only.
Model Features
-
Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards. -
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency. -
Anti-Vibration System
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience. -
STIHL ElastoStart™
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out. -
Semi-Automatic Belt Tensioning
With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings. -
Ergonomic Grip
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position. -
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box. -
Decompression Valve
The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
Standard Features
-
Common Features for STIHL Cutquik® Cut-off Machines
View the features common to many STIHL Cutquik® Cut-off Machines.
Optional Accessories
-
STIHL Cutquik® Cart
Ideal for long, precise cuts, this cart offers improved handling and cutting performance with a forward weight orientation and a toolless quick connect system.
You Will Also Need
-
-
HP Ultra 2-Cycle Engine Oil
No matter how you slice it (or trim it or shred it), there’s no better protection for your high performance 2-stroke engine than STIHL HP Ultra. This 2-cycle engine oil has outstanding engine cleaning characteristics, plus “ultra” lubricating qualities that’s superior to other 2-cycle engine oils. This fully synthetic oil is also highly biodegradable, degrading by 80% in 21 days. We’re so confident this oil will protect your engine, we’ll double your STIHL limited warranty* when you use it. It’s that good.
*Double your warranty when you include 6 bottles of STIHL HP Ultra Oil or 6 cans of STIHL MotoMix® Premixed Fuel with your STIHL product purchase. Double limited warranty protection applies to STIHL gasoline-powered products purchased and registered for personal non-income producing, family and household purposes only. Other restrictions apply. See dealer for details.
-
-
-
No-Spill® Fuel Containers
No-Spill® fuel containers advance convenience and quality in gasoline-can design by reducing emissions of hydrocarbons from evaporation, permeation and spillage. This helps protect the environment as well as saves you on fuel costs due to waste. Each container is molded from fluorinated, high molecular weight material for low permeation. The thumb-button flow control allows filling even smaller-sized tanks reducing the risk of spilling and is designed to stop the flow automatically when the tank becomes full to prevent overflowing. Built on a wide and stable base for less likelihood of upsets and equipped with child-resistant closures, all No-Spill® containers comply with both EPA and CARB requirements. With 1¼-gallon, 2 ½-gallon and 5-gallon sizes available, you’re sure to find one that fits your needs.
-
For Your Safety
-
-
STIHL Forestry Boots
Your work can take you to some of the toughest terrain. STIHL Forestry Boots are lined with two layers of cut-retardant Kevlar®, helping protect you from falling objects and hazards underfoot that can cause punctures. The boots are also flexible and water-resistant thanks to a leather upper construction. Foam padding from the heel to the wide steel toe enhances comfort while its Vibram® soles provide excellent abrasion resistance.
Meets OSHA Reg. 1910.266
Available sizes: 6-13 (in half-size increments), 14
NOTE: Women should order two sizes smaller than their normal shoe size.
-
-
-
STIHL® Construction Hard Hat System
Combining first-class durability and all-day comfort, the STIHL Construction Hard Hat System gives your projects a proper foundation in protection. The system starts with a hard hat made from tough ABS thermoplastic. A six-point ratchet-style suspension system improves comfort, as well as shock absorption. The system also features a Cool Guard sweat band and rain gutters, keeping both perspiration away from your eyes and precipitation away from your neck. Its comfortable, adjustable hearing protection help keep down job site noise while its clear, PETG full-face shield helps keep your face protected from flying debris.
Meets ANSI Z89.1-1997 Type 1 Class. Hearing Protectors meet ANSI S3.19-1974 Noise Reduction Rating (NRR) of 23 dB(A). Full Face Shield meets ANSI Z87.1-1989.
NOTE: Also available as a hard hat only. Meets ANSI Z89.1-1997 Type 1 Class G & C.
-
-
-
Anti-Vibration Gloves
Reduce the vibration from handheld machines with anti-vibration gloves from STIHL. The palms and fingers are specially designed to absorb vibration energy, helping you stay steady throughout your workday.
Classifications: Meets anti-vibration standard ISO 10819:1996 and ANSI S2.73.
-TRm at .72 for mid-frequency range
-TRh at .55 for high-frequency range
Materials: 7-gauge knit shell, shock-absorbing material and elastic wrist
Available sizes: L, XL
-
-
-
Leather Chaps
Designed for use with cut-off machines, these top-quality STIHL Leather Chaps provide maximum protection from abrasion, spatter and sparks when cutting ferrous metals. The chaps cover from the waist down, and feature quick-release buckles as well as easily adjustable nylon straps. Not for use with chain saws.
Available color: Natural Leather
Available sizes: One size fits most
-
STIHL Limited Warranty
Contact Us
