|
STIHL ROLLOMATIC®
ES Super
Solid machined bar made of high-grade steel with a replaceable
bar nose sprocket assembly.
Applications:
For high-performance professional woodcutting with high-powered,
heavy-duty saws. Available from 16" to 59". |
 |
|
STIHL ROLLOMATIC®
ES Light Guide Bar
A guide bar that has 30% less weight in comparison with STIHL ROLLOMATIC® ES Super guide bars. Although lighter, these guide bars are made of the same tough wear-resistant steel. The reduced weight improves the chain saw balance. The guide bars feature a 3/8” 11-tooth sprocket nose with 3003 mounting. They are available in 28” (71 cm), 32” (80 cm) and 36” (90 cm) lengths with grove widths of 0.050” and 0.063”.
Applications:
For high performance wood cutting with larger displacement professional STIHL chain saws. |
|
|
STIHL ROLLOMATIC® E Standard
Three-part (spot welded) laminated guide bar made of high-grade
steel with star-shaped sprocket.
Applications:
All-around bar suitable for homeowner, mid-range or professional users. |
 |
|
STIHL DUROMATIC® E
Solid, laser-welded, high-carbon alloy steel bars with
induction-hardened rails and special hard surface alloy
tipping on the nose for extra long life. They are made
from the highest quality steel and are cut by laser for
consistent quality and durability. Available from 16"
through 47".
Applications:
For high-performance professional woodcutting with heavy-duty
saws. Excellent bar for abrasive cutting conditions and
frequent plunge cutting applications. |
 |
|
STIHL ROLLOMATIC® E Light
30% lighter than comparable STIHL ROLLOMATIC®
E bar.
Available in 12" (3005 000 7405), 14" (3005 000 7409) and 16" (3005 000 7413). |
 |
|
STIHL ROLLOMATIC® E Mini
Available 10", 12", 14" and 16" 3005 mount. Use with STIHL PICCO™ Micro™ Mini saw chain (PMM3) to increase cutting efficiency over PM3 chain by 13%. Accepts drive links of .043 gauge (1.1 mm). |
 |
|
STIHL ROLLOMATIC® Mini
Available in 12", 14" and 16" 3005 mount.
Use with STIHL PICCO™ Micro™
Narrow saw chain (PMN) to increase cutting efficiency
over PM1 chain by 13%. Accepts drive links of .043 gauge
(1.1 mm). |
 |
|
STIHL DUROMATIC® C
Available in 10" and 12" solid nose. Carving guide bar can only be used with 1/4" saw chain. 1/4" spur sprockets available for MS 192 C-E, MS 201 C-E, MS 210, MS 230, MS 250 and HT 56 C-E models. |
 |
|
Replaceable sprocket nose
Sprocket noses are replaceable on STIHL ROLLOMATIC®
ES Super guide bars. Unlike some guide bars, the sprocket nose is anchored
by three rivets instead of one. Tests at STIHL in
Germany show that a bar tip anchored by three rivets
could last from two to three times longer than a
bar tip anchored by only one rivet— another
reason to choose STIHL guide bars. |
|
|
Part Numbers for Replaceable
Sprocket Noses
|
|
|
STIHL Narrow Nose/Wide Nose Guide
Bars
Many STIHL guide bars are available in the same lengths,
pitches and gauges.
Advantages of the narrow nose version:
- Reduced kickback tendency
- Less weight (slim profile)
|
Advantages of the wide nose version:
- Larger sprocket nose bearing
- Longer lifetime for frequent plunge cutting
applications
|
|
|
