Protective Footwear

WARNING!
These boots contain pads of cut and puncture-retardant material designed to reduce the risk or severity of injury to the parts of the foot covered by the pads in the event of contact with a rotating chain. In some contacts, the pads may stop the chain. In other contacts, the pads will resist the cutting process only for a fraction of a second. The actual degree of protection afforded will vary with the speed of the chain at the time of contact, the power of the saw and similar factors. Severe personal injury can result from contact with the chain of your chain saw despite use of these boots. These boots are not intended to be a substitute for good safety procedures in the use of your chain saw. If the protective pads of these boots are damaged or cut, the cut-retardant qualities of the pads may be eliminated. Once the protective pads are cut or damaged, these boots should no longer be used as protective clothing.

WARNING FOR ELECTRIC CHAIN SAW USERS!
The fibers will not stop the sprocket on most electric chain saws because of their constant high torque.

Where this label appears, these boots have been Classified by UL® (Underwriter Laboratories Inc.) as chain saw cut-retardant foot protection for all Operators of Gasoline-Powered Chain Saws by using ASTM (American Society of Testing & Materials) F1458 Test Method and ASTM F1818 performance standard.
See complete marking on the product.

WARNING!
Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.