IMPORTANT INFORMATION These protective garments contain pads of cut-retardant material designed to reduce the risk or severity of injury to the body parts covered by the pads in the event of contact with a rotating chain. The fibers in the pads provide extra layers of material and are designed to rip apart if they come into contact with the moving chain and to clog the sprocket and stop the chain in certain circumstances. In some contacts, the pads may stop the chain. In other contacts, the pads will resist the cutting process only for a fraction of a second. The actual degree of protection afforded will vary with the speed of the chain at the time of contact, the power and torque of the saw, the design of the chain saw sprocket and similar factors. Follow the washing instructions. Improper care may destroy cut-retardant properties of the material.
WARNING FOR ELECTRIC CHAIN SAW USERS! The fibers will not stop the sprocket on most electric chain saws because of their constant high torque.
Where this label appears, these garments have been Classified
by UL® (Underwriter Laboratories Inc.)
as chain saw cut-resistant leg protection for all Operators
of Gas Powered Chain Saws by using ASTM (American Society
of Testing & Materials) F1414 Test Method and ASTM F1897
performance standard.
Ambush® is a regsitered trademark of
Travis Textiles. Thinsulate® is a registered
trademark of 3M Corp.
WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.
